GMC Emblem Light Up Features:
1,Replaces your factory emblem to add a stylish touch to your vehicle.
2, Dimension: 10.9X2.36 inch(27.7CM*6CM), 13.38X2.95inch(34CM*7.5CM)
Pls make sure your vehicle dimension before order. We will not accept the return back due the the emblem size issue.
3, Light-up insignia activates when running lights are on.
4,Stick-on application with pre-applied heavy-duty tape.
Package: 1X GMC emblem light up light
Rear GMC Light Up Emblem Installation:
1, Turn off the vehicle.
2,Mark the position of the emblem with a washable marker or masking tape prior to removal.
3,Use a heat gun or equivalent to remove the existing emblem from the endgate surface. Carefully use a plastic flat- bladed tool to assist in removal.
4,Clean any remaining residue with a 50/50 mixture by volume of alcohol and clean drinkable water. Wipe surface dry with a clean lint-free towel.
5. The part surface should be 21°C prior to installation. The vehicle should remain 21°C for one hour afterassembly to allow adhesive to develop sufficient bond strength.
6. When removing protective liners from the adhesive tape, be careful not to touch tape with hands and do not allow tape tocome in contact with dirt or any foreign matter prior to adhesion.
7. Position new emblem carefully within reference marks and place on prepared surface of endgate.
8. Using the palm of the hand, apply strong pressure to all areas of the emblem to ensure full adhesion is achieved.
9. Carefully remove any markings or tape used to locate the rear emblem. Clean the endgate surface as needed.